meteocontrol Power Control 03082012 - en
61/78
After performing a successful test run, set the write protection slide switch of
the PCU to ON to prevent abuse or mistaken reconfiguration.
9.6
Power Control slave WEB`log
The slave data logger receives the control values for the Power Control from
the master. The power procedures are defined in the master and the
parameters are sent to the slaves.
1.
Define data logger as the slave
2.
Configure the type of the message to be received
- General broadcast message
See section 6.6 Power requirements configuration Fig. 17
- Single message
See section 6.6 Power requirements configuration Fig. 18
- Group broadcast
See section 6.6 Power requirements configuration Fig. 19
