Metaphase Technologies Metaphaser MP-LE1007, Operating Manual

Page: 25 / 35

Single Pulse Limit in Strobe (Pulse) Version
The Metaphaser works by discharging a capacitor into the load at a constant current. At 4A or less,
the capacitor can be recharged as fast as it is discharged allowing the pulse width to be up to the
maximum of 60ms regardless of the exact current. Above 4A, the pulse width and current are
constrained by the following equation. The Metaphaser will automatically limit the pulse width or
current to satisfy this equation.
pw <= 0.01 / i
where: pw = pulse width in seconds
i = current in Amps
The relationship in this equation is shown in the following diagram:
For example, the Metaphaser will not allow output pulse widths greater than 500 microseconds if
the output pulse current is set to 20A.
Metaphase LED Light Engine
Model#: MP
-
LE1007
Metaphase LED Light Engine
Model#: MP
-
LE1007