Metaphase Technologies Metaphaser MP-LE1007, Operating Manual

Page: 3 / 35

Metaphase LED Light Engine
Model#: MP
-
LE1007
Unpacking:
The METAPHASER comes with the following accessories:
• AC Power cord & Power Supply
Unit Setup and Operation
2. Connect the power adapter to power port on rear of Metaphaser
1. Place the unit on the work surface being careful not to obstruct either of the fan
’s intake or exhaust port.
Failure to do so could cause loss of airflow in your unit causing the LED engine to overheat and shutdown.
3. Insert the fiber optic light guide into the nose piece being sure to bottom it against the stops.
4. Tighten the thumbscrew on the nose piece to secure the fiber guide in place.
5. Turn unit on by setting toggle power switch located on the rear of the Metaphaser to the ON position.
Record all default values for future reference.
6. The unit will power-up to the last known state and values used. (Observe Safety Notes)
Safety:
Intensity of this product can cause eye damage if viewed directly. Metaphase
Technologies Inc. requires the use of appropriate eye-protection when using this product.
Disclosure: DO NOT STARE DIRECTLY INTO THE LIGHT.
www.metaphase-tech.com