Metaphase Technologies Metaphaser MP-LE1007, Operating Manual

Page: 13 / 35

Quick Start - Setup Menus - Strobe Version (continued)
•
Trigger Controls DC
– Used to control DC LED output via trigger signal if set to YES; Default
(Normal) is a setting of
NO. If “Trig Controls DC” is set to YES, then the trigger input will
control the DC Current output. If “Trigger Polarity” is set to “RISING”, then the output will be
ON when a voltage is present at the trigger input. If “Trigger Polarity” is set to “FALLING”,
then the output will be ON when a voltage is NOT present at the trigger input.
•
IP Address
– To change the IP Address, select IP Addr Octet from the menu. Using the Up ▲
and D
own ▼ arrows, scroll through each Octet 1-4 to change each segment of the IP
Address. Default IP Address is 172.161.1.1.
•
Keypad Lock: To prevent changes to the Metaphaser controls, a lock button feature is included.
•
Keypad Unlock: When locked, press the M and
▼ ▲ buttons simultaneously and select YES to
Enter the Setup menu. From there, scroll down to the Unlock Menu and select UNLOCK.
A locked controller can also be unlocked via MetaBOSS. A setting of unlocked is default.
5. Exit the Setup Menu to enter the Run-time Menu.
Metaphase LED Light Engine Metaphase LED Light Engine
Model#: MP
-
LE1007
Keypad Status:
Keys unlocked
IP Addr Octet 4:
172.161.1.1
IP Addr Octet 3:
172.161.1.1
IP Addr Octet 1:
172.161.1.1
Exit Setup?
Yes
IP Addr Octet 2:
172.161.1.1
Trig Controls DC
Chan 1 No-Normal