Up/Down Speed:
The UP/Down speed is the speed at which the beam returns from bending to the open position (in %
max speed).
Slow Ramp:
The distance used to change from one speed to another (in mm).
Maximum/Minimum Position:
The Maximum/Minimum Positions are the limits on the position of the beam (in mm).
Dummy Position:
This is a secondary Top/Bottom Position used to speed up the
Pressbrake (in mm).
Easy Calibrate:
This allows calibration of the position by bending a test piece, and
entering the difference.
Quick Calibrate:
This is a wizard to troubleshoot problems with the Y axis, and
corrects the offset once the settings are verified.
Page 23
Instruction Manual For Fasfold Controller
04/12/2014
