20. Box Mode
Lets program the box below.
Use QuickDraw to draw the Front view of the box above.
Edit the sizes on the profile on the main screen as described in section 4.
Set the right tooling, material thickness, width, bend sequence, name it Box1 a and save. Get the
right tooling on the machine and test fold the job to make sure the tooling is correct (alter trim
angles if necessary) and save.
Now draw up the side view and name it box1 b.
Edit the sizes on the profile on the Main screen. Get the right tooling on the machine and test
fold the job to make sure the tooling is correct and save.
Now link the 2 jobs together by pressing open, Link with current and press on box1 b if box1 a is
open already. If box1 b is already open, then link and open box1 a.
Page 13
Instruction Manual For Fasfold Controller
04/12/2014
