23. Program and save a new tool
From the Main screen, press on the top tool graphic which will take you to the Tool screen. From
there press QuickDraw which takes you to the Tool Quickdraw screen.
Starting from the bottom in a anticlockwise
direction, touch on each of the approximate corners to get the basic shape drawn.
The end point of the tool should be touched in the same spot as the start point to complete the
tool. Press UNDO if you make a mistake. Press OK to return to the Tool screen. You will be
prompted for the tool height. Enter this as the height from tool tip to the shoulder of the tool.
Actual sizes can now be edited on the data area on the left. Enter the radius of the tool, give it
a name and save.
Page 16
Instruction Manual For Fasfold Controller
04/12/2014
