Mesutronic METRON 07 C, Translation Of The Original User Manual

Page: 9 / 84

-7- General information
Transport
When transporting the machines, you must observe the following points:

When exceeding the country’s legally prescribed maximum weight limits for
people moving goods, lifting devices must be used!

Mount the lifting devices in accordance with the following drawing! (check your
coil type!)

When mounting the eye bolts, please take care that they fit snugly onto the
bearing face. Loads that run diagonal to the ring face are not allowed.

Mounting the lifting devices and transport may only be carried out by trained and
authorised staff!

During transport, the safety regulations in force must be observed!
Mounting the C, CI-Coil, SlimLine
1. horizontal
2. vertical
Installation
Requirements for the place of installation:

Sufficient stability and load-bearing capacity of the substrate

Please consult the manufacturer if the position is not horizontal
Storage

The place of storage must be free from direct influences of the weather (frost, wetness,
direct exposure to the sun).

Place of storage in dust-free, closed rooms.

Place of storage free from condensed water, acids, alkalis and other corrosive materials
(vapours of these materials)

Storage in the packed condition

The adherence to the storage conditions is to be checked at regular intervals.
In the event of non-adherence to the above conditions, no warranty claims can be accepted
for any technical defects caused by improper storage.