-47-
Adjustment
Device settings
Save device settings
The settings can be saved internally or on a connected USB stick
Load device settings
The settings can be restored using the internally stored files or using the files on a connected USB
device
Systeminfo
Version info
The
software version
and further important data are displayed under
Version info
.
Please make a note of the information in case you need it for service enquiries:
Display
Unit
Sensor
Unit
Control
Unit
Serial
number:
Component:
Software:
Core:
Measured values
Under the menu item
Measured values
you can call up internal parameters from the metal detection
circuitry. These measured values are intended for service and diagnosis purposes.
Sensor Unit
Measured value
designation
Measured
value
Meaning
TX_CHECK_SIN_A
12.4V
Transmitter voltage A
TX_CHECK_SIN_B
12.2V
Transmitter voltage B
TX_CHECK_LOAD 0.51V
Transmitter
load
+24V
24.00V
Supply v24VD
+15V
15.00V
Supply v15V
-15V
-15.00V
Supply voltage -15V
+3.3V
3.3V
Supply v3.3V
+1.2V
1.2V
Supply v1.2VA
+12V
12V
Supply v12V
-12V
-12V
Supply voltage -12V
Temperature SU
40.29 °C
Internal temperature sensor (sensor unit)
Temperature ext
-55.00 °C
External temperature sensor (optional)
RX Ampl
-0.059 mV
Receiver voltage on amplitude branch
RX Pha
-0.004 mV
Receiver voltage on phase branch
signal 0.00/0.00
°
Signal
sig. angle
0.00/0.00 °
Signal angle
comp. angle
90.00 °
Compensation angle (learning angle)
noise level
11 sample
Noise level measurement (5000 samples long)
Summary of Contents for METRON 07 C
