8
SECURE THE RAKE
against access by children and immobilize the arms.
WHEN DISCONNECTING
the rake from the tractor always set it on its support.
3.2.5.
TECHNICAL MAINTENANCE
Service the rake
while it is parked, before connecting it to the tractor. If you must service the
rake while it is coupled with the tractor, do the following:
- put the rake on the ground.
- Shut down the engine, immobilize the tractor, remove the key from the ignition switch and
uncouple the telescopic articulated shaft.
Check the bolt connections daily, before starting your work, and, if required, tighten loosened
parts.
Monitor the parts for wear and damage and, if required, replace them early enough with new
original parts manufactured by Z 548, because only these will provide the desirable result.
3.2.6.
SAFETY SIGNS
The rake has warning labels with safety icons applied at the points shown in Fig. 1. They contain
clear notices and tips about what you should be particularly careful about to stay safe.
Examine each of these labels carefully and check their meaning based on the descriptions provided
in this section.
Keep the labels clean and legible over the whole lifetime of the rake.
If any label becomes illegible or is damaged or lost, replace it with a new one.
Apply all the required labels to new parts and assemblies.
You may buy new labels from your dealer or the manufacturer, as spare parts. Provide the number
of the old label while ordering/purchasing a new one.
Summary of Contents for Z 548
