Mesko-Rol Z 548, Service Manual, Spare Parts

Page: 4 / 52

3
1. INTRODUCTION
Due to the importance of its contents, this manual is an essential part of the product package. We
recommend the dealer to retain the buyer-signed written acknowledgement of receipt of this manual
together with the product, whether new or second-hand.
The rake was manufactured in accordance with the applicable safety standards. Following the
information (instructions, descriptions and warnings) contained in this manual will ensure perfectly
safe operation of the device.
The identification details for the machine are provided on the name plate attached to the frame.
We recommend using original spare parts from MESKO-ROL as this will maximize the lifetime of
your machine.
CAUTION! If you have any doubts or if anything contained herein is unclear, please contact your
dealer or our Sales Department:
Phone: 048,041,253-41-20
Fax: 048,041,253-33-09
marketing@mesko-rol.com.pl
The name plate, the specimen of which is given below, is located on the product as shown in fig.
1.
Due to the continuous development of our products, we reserve the right to make any modifications
or improvements to our products at our sole discretion. However, this shall not imply any obligation
on our part to upgrade any product that we have already sold.
2. APPROPRIATE USE OF THE MACHINE
The rake is intended for raking grass and short-stalk green forage on crop fields and meadows with
even surface, free from stones and obstacles, and with slope of up to 12°.

For uneven meadows,
precise raking is ensured by the tandem version of the rake.
Any other use is “unintended”.
Furthermore, compliance with the “intended purpose” means strict adherence to the manufacturer’s
operation and maintenance instructions.
The machine may be operated and serviced only by personnel familiar with the detailed features of
the device and safety procedures.
Accident prevention and all other main work safety regulations, as well as traffic regulations, should
be followed at all times.
Any modification of the machine without authorization from the manufacturer may release the
manufacturer from liability for the resulting damage.