background image

Optional Items

Gripper Mat

Non-slip rubber mats are handy to  
increase traction and prevent slipping.
A Gripper Mat can be wrapped around  
push-thru bar [64], roll-down bar [62], 
uprights or placed on upholstered beds.

Foam Cushions

Available in three sizes. Used for comfort 
and additional support when performing  
a wide variety of exercises.

A:

 9"x 6"x 1" / 23 x 15 x 2.5 cm 

B:

 9"x 6"x 3" / 23 x 15 x 7.6 cm 

C:

 13"x 10"x 2.5" / 33 x 25.4 x 6.4 cm

Eco-Friendly Pilates Pad

Non-slip eco-friendly pads can help 
establish correct alignment and positioning 
or to provide cushioned support.

Reformer Box

Used to facilitate or vary exercises. 

Safety Chain

For use with push-thru bar. 

CAUTION:

 Safety chain must be in place 

when using push-thru springs from above.

Push-Pin

Used to secure push-thru bar.

Spring Clips 

Replace spring clips every 12 months or 
earlier as needed.

CAUTION:

 Locking spring clips are 

required when using pu  sh-thru bar with 
springs from below. 

Do not use non-

locking spring clips.

Metal & Maple Roll-Up Poles

This solid maple roll-up pole is used 
to increase scapular awareness while 
performing exercises. Sold separately. 

Extension Straps

Assists alignment of the knee 
jointAvailable in 24" or 26" lengths.

Arc Barrels

Ideal to increase or decrease challenge  
and to assist rehab clients. The Arc Barrel 
Deluxe adds comfort with Baltic Birch hand 
grips on the sides.

Padded Platform Extender

Provides a raised padded surface on 
the upholstered bed for seated or 
standing exercises.

Padded Sliding Stability Bar Sleeve

Removable covering adds cushioning to  
sliding stability bar.

13

Summary of Contents for Tower Trainer

















Reviews: