background image

To order, visit 

merrithew.com/replacementparts

 or email 

[email protected]

11

Storage & Mobility

WARNING:

 When folding or unfolding the Tower Trainer

, keep all children away from the Tower Trainer and make sure hands and feet are 

clear of any folding or pinch point.

Folding

a.

 Move any attached accessories to the back side of the tower so 

the mats can fold up against the sliding stability bar [30]. 

b.

 Ensure upper and lower push-pins (26) are inserted with the 

push thru bar (25) locked down. 

c.

 Remove the locking knobs [21] to unlock the main frame [14]. 

d.

 With one hand on one of the handle straps [15] on the raised 

main mat [20], and one hand on the extension frame [18], slowly 
lift the main frame [14] and extension frame [18].  
The extension frame [18] will fold down against the  
main frame [14] as you lift. 

e.

 When both frames are in the most vertical position possible, 

parallel to the left and right uprights [10, 24], secure the 
main frame [14] to the left and right uprights [10, 24] with the 
locking knobs [21].

Unfolding

a.

  Unscrew the locking knobs [21] from the uprights completely.

b.

 With one hand on the handle strap [15] of the raised main mat 

[20], and one hand on the extension frame [18], carefully extend 
it completely to rest on the floor. 

c.

 Replace the locking knobs [21] securing the main frame [14] 

to the base frame [13] and fully tighten for security.

Moving

To move the Tower Trainer, it must be folded. The push-thru bar 
must be locked down. While on the wheeled side of the folded 
Tower Trainer, grasp the upper tube assembly [2] with one hand, 
place your foot against the base frame [13], and hold the upright 
with your other hand. Pull the Tower Trainer toward you while 
holding the base steady with your foot until the wheels come in 
contact with the floor. Then roll the Tower Trainer while holding 
the upper tube assembly [2] and right upright [24] to steady and 
guide the Tower Trainer.

Storing

Store the Tower Trainer in a clean, dry place.

25

.

14/20

.

24

.

26

.

13

.

 2

.

16/18

15

.

21

Summary of Contents for Tower Trainer

















Reviews: