Merrithew Tower Trainer Owner'S Manual Download Page 14

Tower Trainer

 Owner’s Manual

14

THE FINE PRINT

Warranty

Merrithew

 warrants that all new equipment is free of manufacturing defects in workmanship and materials, subject to the terms below. 

This warranty becomes effective at the invoice date of the original purchase. Parts repaired or replaced under the terms of this warranty  
will be warranted for the remainder of the original warranty period.

It is the purchaser’s responsibility to notify the Company of any change of contact information. This ensures, that in the unlikely event 
of a replacement or safety notice, we are able to contact you immediately.

This warranty applies to equipment only:

w

   

While it remains in the possession of the original purchaser and proof  
of purchase is demonstrated 

w

 

If claims are made within the part-specific warranty period 

w

   

If upgrades are made as required by Merrithew

This warranty shall be null and void if:

w

   

Equipment failure is a result of improper assembly, 
installation or maintenance

w

   

The equipment is used for any other purpose other than as 
intended, or is stored or used outdoors, or in environments 
without adequate climate/humidity controls

w

    

Equipment has been subjected to accident, misuse, abuse, 
improper service, or any modification not authorized by Merrithew

This warranty does not cover damage to the finish of any equipment 
nor shipping charges, customs clearance fees (if applicable), or any costs 
incurred in installing repaired or replacement parts shipped under the 
provisions of this warranty.
Failure to change springs every two (2) years may void warranty. 

Five (5) Year Limited Warranty

Merrithew will, at its option, repair or replace any of the parts listed below, 
provided that the part(s) fail due to a defect in workmanship or materials:  

w

  vertical bars and overhead frame 

w

  components of the frame and related welding 

Two (2) Year Limited Warranty

Merrithew will replace springs that fail for any reason, provided such failure 
is reported to MERRITHEW within a period of two years from the invoice 
date of the original purchase. We recommend that springs be changed 
every two (2) years

One (1) Year Limited Warranty

On other parts and components. We recommend that spring clips  
be changed annually. 

90-Day Upholstery Fabric Warranty

The vinyl fabric upholstery and spring sleeves will be replaced if they 
fail to give normal wear for 90 days after delivery. Proof of damage 
may be required. This warranty does not cover cuts, burns, stains, 
soiling, pet damage or damage caused by other unreasonable use. 
This warranty does not apply to fabrics cleaned with abrasive, corrosive 
or chemical cleansers. If the identical fabric is not available, Merrithew 
will provide an equivalent. 

Disclaimer of Implied Warranties and Limitation of Remedies

Repair or replacement of defective parts is your exclusive remedy under 
the terms of this limited warranty. In the event of parts availability issues, 
Merrithew will not be responsible for any consequential or incidental 
damages arising from the breach of either this limited warranty or any 
applicable implied warranty, or for failure or damage resulting from acts 
of nature, improper care and maintenance, accident, alteration, replacement 
of parts by anyone other than Merrithew, misuse, transportation, abuse,  
hostile environments (inclement weather, acts of nature), improper 
installation or installation not in accordance with local codes or 
printed instructions.

This limited warranty is the sole express warranty given by 
Merrithew. No product performance, specification or description 
wherever appearing is warranted by Merrithew except to the extent 
set forth in this limited warranty. Any implied warranty protection 
arising under the laws of any state, province or territory including 
implied warranty of merchantability or fitness for a particular 
purpose, or use, is hereby limited in duration to the duration of this 
limited warranty.

Neither distributors, dealers, web resellers, nor the retailers selling this 
product have any authority to make any additional warranties or to 
promise remedies in addition to, or inconsistent with those stated above. 
Merrithew’s maximum liability, in any event, shall not exceed the purchase 
price of the product paid by the original purchaser.

 IMPORTANT

Please keep this manual in a safe place.  
If you have questions, issues or are missing parts:
Do NOT return this unit to your local retailer,  
please contact the manufacturer directly.
[email protected] 

416.482.4050

 

|

 

1.800.910.0001

 

|

 

0800.328.5676 UK

 

|

 

ext. 0907

Mechanical Safety Check

Proper maintenance and timely replacement of your equipment or component parts is your responsibility.  
Conduct a regular inspection of the following:

Daily

w

  

Clean all surface areas after each use,  
using a soft cloth and gentle cleanser.

Weekly

w

  

Check all springs and spring clips for wear  
and damage and replace as needed.

Monthly

 

w

  Ensure all nuts, bolts and screws are securely fastened. 

 

w

  Ensure eyehooks are securely fastened.

Yearly

w

  

Replace all spring clips.

Every Two Years

w

  

Replace all springs.

REPLACE ALL SPRINGS EVERY 24 MONTHS AND SPRING CLIPS 
EVERY 12 MONTHS OR AS NEEDED WITHIN THAT PERIOD.

FAILURE TO PERFORM RECOMMENDED SAFETY CHECKS, OR 
USING THE MACHINE WITH IMPROPERLY ADJUSTED, BROKEN OR 
WORN PARTS, COULD RESULT IN SERIOUS BODILY INJURY.

Summary of Contents for Tower Trainer

















Reviews: