22
2.5.7. To replace the electric components mounted on dashed board assembly
◆
When should you replace the related electric components?
◇
If the electric components are deformation.
◇
If the electric components out of shape due to an accident.
◇
If the electric components are difficult to operate or can’t work.
◆
How to replace the related electric components?
◇
Please proceeding steps as follows if it has to remove.
1. Unplug all connectors which connect to PCB (5.37), the connectors
including the charger socket assy (5.55)
、
head light button wire
(5.48)*4sets
、
indicator switch wire (5.53)
、
key switch wire (5.45)
、
speed pot. Wire (5.39)
、
power cord (5.42) and power indicator (5.41)
2. Loosen the brass stud (5.36)*4pcs and take out the PCB from upper
cover (5.32).
3. Each button
、
switch and electric component which mounted on upper
cover all coating the polyester to avoid loosing, so if you want to take
out the component which you want, you must clean away it by knife
and alcohol to assist.
4. Loosen the screw which mounted to the side of speed knob (5.40)
then can take it out from potentiometer (5.38).
5. Use the wrench to loosen the nut (attached to potentiometer) then
separate potentiometer (5.38) and upper cover (5.32).
6. To remove the fuel gauge from upper cover, use the (-) screw driver
to press the salient on the side of fuel gauge and push it to come off.
Summary of Contents for S331 series
Page 1: ...Merits S331 S341 series Service Manual Nov 1 2006 V1 ...
Page 24: ...23 ...
