Merits S331 series Page 11 Service Manual Download | Manualshive

Page: 11 / 24

background image

10

◇

If the suspension frame out of shape due to an accident.

◆

How to replace the transaxle assembly and the suspension frame?

◇

Please proceeding steps as follows if it has to replace.

1. Loosen the screw (1.51) by hex. tools. (two side)
2. Loosen the screw (2.03) and nylon nut (2.06) by hex. tools and

wrench , then take the suspension frame away from front frame.

3. Loosen the screw (2.08) and nylon nut (2.10) by hex. tools .

4. Loosen the screw (2.13) and nylon nut (2.14) by hex. tools and

wrench , and take off the fixing stand (2.12) and brake fixing stand.
(2.24)

5. Take off the transaxle assembly (5.5) from suspension frame.

2.2.7. To remove the rear bumper and anti-tipper assembly

◆

When should you replace the rear bumper/rear anti-tipper assembly?

◇

If the rear bumper/rear anti-tipper assembly out of shape due to an

accident.

◇

If rear bumper/the rear anti-tipper assembly is deformation.

◆

How to replace rear bumper/the rear anti-tipper assembly?

◇

Please proceeding steps as follows if it has to replace.

1. Loosen the screw (2.22) and nylon nut (2.10) two sides by wrench to

take out the rear bumper (2.21).

2. At the same time, pull out the anti-tipper assembly L/R (2.1/2.2) from

the suspension frame (2.01).

3. Loosen the screw (2.17) and nylon nut (2.18) by (+) screw driver and

wrench to take out the anti-tipper wheel (2.20)

«
...
9
10
11
12
13
...
»

Summary of Contents for S331 series

























Reviews:

No comments

Related manuals for S331 series

Brand: Decon wheel Pages: 5

Brand: Able 2 Pages: 8

Shuttle A series

Brand: Sizewise Pages: 4

Brand: Anatomic SITT Pages: 40

Brand: R82 Pages: 48

Brand: BetterLiving Pages: 12

SystemRoMedic ReTurnBelt

Brand: Direct Healthcare Group Pages: 36

Brand: Home Medical Products Pages: 2

XXL-Rehab Rollator Support

Brand: Cobi Rehab Pages: 8

Brand: identités Pages: 11

Brand: Vitea Care Pages: 16

MOBILITY STAR8 DX WIDE

Brand: Nova Pages: 2

Brand: Nova Pages: 2

Traveler 4900 Series

Brand: Nova Pages: 5

STAR 8 DLX WIDE 4264

Brand: Nova Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands