Merits S331 series Page 13 Service Manual Download | Manualshive

Page: 13 / 24

background image

12

2.3.2. To replace the front wheel with fork assembly

◆

When should you replace the front wheel with fork assembly?

◇

If your front wheel with fork assembly is deformation.

◇

If the front wheel with fork assembly out of shape due to an accident.

◇

If the front wheel with fork assembly is worn out.

◆

How to replace the front wheel with fork assembly?

◇

Please proceeding steps as follows if it has to replace.

Loosen the headset bearing (1.02) by wrench, and take out the front

wheel with fork assembly (1.2) from front frame.

2.3.3. To replace the front bumper assembly

◆

When should you replace the front bumper assembly?

◇

If the front bumper assembly out of shape due to an accident.

◇

If front bumper assembly is deformation.

◆

How to replace front bumper assembly?

◇

Please proceeding steps as follows if it has to replace.

Loosen the screw (1.05) and nylon nut (1.06) both side by hex. tools and

wrench. Then you can take out the front bumper.

2.3.4. To replace the front wheel

◆

When should you replace the front wheel with fork assembly?

◇

If your front wheel is deformation.

◇

If the front wheel out of shape due to an accident.

◇

If the front wheel is worn out.

◇

If the front wheel is pierced by something.

◆

How to replace the front wheel?

Please proceeding steps as follows if it has to replace.

«
...
11
12
13
14
15
...
»

Summary of Contents for S331 series

























Reviews:

No comments

Related manuals for S331 series

CHURCHiLL 2000CS15-D

Brand: Pediatric Car Seat Pages: 49

Brand: EZee Life Pages: 7

190 Tilt Shower Commode

Brand: EZee Life Pages: 11

Brand: EZee Life Pages: 12

Brand: Vermeiren Pages: 28

Brand: Vermeiren Pages: 152

Brand: Vermeiren Pages: 136

Brand: Rehasense Pages: 7

Carbon Rollator Series

Brand: SALJOL Pages: 32

Brand: identités Pages: 11

ROLLATOR NEO FASHION

Brand: identités Pages: 11

Brand: Gate Pages: 8

Brand: identités Pages: 7

Brand: Vela Pages: 2

Brand: identités Pages: 7

Brand: Graham Field Pages: 12

Brand: Winncare Pages: 8

Brand: TherAdapt Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands