16
2.4.4. To replace the front bumper
◆
When should you replace the front bumper?
◇
If the front bumper out of shape due to an accident.
◇
If the front bumper is deformation.
◆
How to replace rear bumper/the rear anti-tipper assembly?
◇
Please proceeding steps as follows if it has to replace.
1. Loosen the screw (1.04) and nylon nut (1.05) by hex. tool and
wrench .
2. Pull out the front bumper (1.03) from front frame.
2.4.5. To replace the half speed sensor bracket and sensor
◆
When should you replace the half speed sensor?
◇
If the half speed sensor is deformation.
◇
If the half speed sensor is not functioning well or can’t not work.
◆
How to replace rear bumper/the rear anti-tipper assembly?
◇
Please proceeding steps as follows if it has to replace.
1. Loosen the screw (1.38) by screw driver.
2. Take out the sensor bracket (1.37) with sensor from front frame.
3. Loosen the screw (1.40) by screw driver to take out the sensor (1.39)
from bracket.
Summary of Contents for S331 series
Page 1: ...Merits S331 S341 series Service Manual Nov 1 2006 V1 ...
Page 24: ...23 ...