18
1. Remove the cotter pin (1.16) by pliers, then loosen the screw (1.14)
and nut (1.15) by hex. tools and wrench.
2. Loosen the screw (1.18) and nut (1.22) to take out the front
suspension arm (1.13) and related parts : urethane block (1.20)
3. Loosen the screw (1.09) and nut (1.10) *4pcs to separate the
supporting plate (1.08) from frame and front suspension bracket (1.12)
from supporting plate (1.08).
2.5 Tiller Assembly(S331/S341 Series)
The Tiller assembly includes tiller frame, control units, main harness,
shroud, adjustable component.
2.5.1. To replace the tiller assembly
To remove the tiller assembly from vehicle please refer to the item
2.3.1. step 1~5.
2.5.2. To replace the rear shroud of tiller
1. Loosen the screw (5.20)*6pcs by screw driver
2. Press the lever (5.05) down then take out the rear shroud (5.19).
◆
When should you replace the rear shroud of tiller?
◇
If the rear shroud of tiller out of shape due to an accident.
◇
If the rear shroud of tiller is deformation.
◆
How to replace the rear shroud of tiller?
◇
Please proceeding steps as follows if it has to replace.
Illus. 09
Summary of Contents for S331 series
Page 1: ...Merits S331 S341 series Service Manual Nov 1 2006 V1 ...
Page 24: ...23 ...
