4
(3.41)
from the bottom of the seat body assembly, then remove the seat
base plate.
2.1.3. To replace the slide
◆
When should you replace the slide?
◇
If the seat base plate is deformation.
◇
If the seat base plate out of shape due to an accident.
◆
How to replace the slide?
◇
Please proceeding steps as follows if it has to replace.
Use hex. tools to loosen four screws
(3.14)
from the bottom of the seat
body assembly, then remove the slide (3.12).
2.1.4. To disassemble seat body
◆
When should you replace the seat body?
◇
If the seat body is worn out.
◇
If the seat body is pierced or scratched by something.
◇
If the scooter crashed cause the seat body out of shape.
◆
How to replace the seat body?
◇
Please proceeding steps as follows if it has to replace.
Follow the following step to disassemble seat body. a) Remove seat
body assembly (see section 2.1.1). b) Use ratchet & socket to loosen rear
two screws
(3.14)
fixed the slide rails. c) Pull the slide swivel lever up,
then slide the seat body forward to limit. d) Use hex. tools to loosen the
other screws
(3.14)
fixed the slide rails.
Summary of Contents for S331 series
Page 1: ...Merits S331 S341 series Service Manual Nov 1 2006 V1 ...
Page 24: ...23 ...
