37
WARNING
Take care when you use Loctite to avoid serious
personal injury. Follow the manufacturer’s
instructions to prevent irritation to the eyes
and skin.
15. Apply Loctite No. 271 or Three Bond 1305
liquid adhesive to the threads of the remaining
fasteners for the main differential case
assembly. Refer to Section 4.
16. Install and torque the remaining fasteners in
the main differential case assembly in
accordance with the specified torque values
in Section 7.
17. Apply grease to the thrust washer and install
with care as to not allow any grease to fall into
the differential case.
Assemble the Differential Case Halves
WARNING
Observe all warnings and cautions provided
by the tool manufacturer to avoid serious
personal injury and damage to components.
1.
Check the new bearing cones for burrs and
cleanliness.
2.
Install the new bearing cones in both halves of
the differential case using an appropriate tool
or a press.
Figures 5.42 and 5.43
.
3.
Make sure that the cups are perfectly seated.
4.
Install the differential case (plain half) onto the
ring gear.
5.
Install the pinion case and its thrust washer
using a lifting device.
6.
Install the flange half case to the ring gear.
Figure 5.44
.
Figure 5.42
Figure 5.43
Figure 5.44