9
Disassemble the Differential and Ring
Gear Assembly
1.
Remove the capscrews that hold the case
halves together.
Figure 2.20
.
2.
Separate the flange case half from the ring
gear using an appropriate puller.
Figure 2.21
.
3.
Disassemble the case halves and the thrust
washer using an appropriate hook.
Figure 2.22
.
4.
Separate the ring gear from the plain half of the
case to replace some of the parts, if necessary.
WARNING
Observe all warnings and cautions provided
by the tool manufacturer to avoid serious
personal injury and damage to components.
5.
If necessary, remove the bearing cones from
the case halves, using an appropriate puller or
a press.
Figures 2.23
and
2.24
.
6.
Mark the two halves of the case and the spider
so that the original position is identified when
reassembled.
Figure 2.25
.
Figure 2.20
Figure 2.21
Figure 2.22
Figure 2.23
Figure 2.24
Figure 2.25