15
10. Remove the snap ring (if applicable) from the
end of drive pinion with snap ring pliers that
expand.
Figure 2.45
.
11. Remove the spigot bearing from the drive
pinion with a bearing puller.
Figure 2.46
.
12. If equipped with a two-piece spigot bearing,
remove the inner race from the pinion using a
bearing puller.
13. Remove the outer race/roller assembly from
the carrier using a drift or a press.
Figure 2.47
.
Figure 2.45
Figure 2.46
Figure 2.47
SPIGOT
BEARING
SNAP RING
SPIGOT
BEARING
BEARING PULLER
Remove outer race
and roller assembly
from carrier.
Remove inner race
from pinion.