Introduction
I
n choosing the 502 Analogue Controller you have acquired a component
that combines major advances in audio and engineering design. The 502
Analogue Controller is a dual mono preamplifier with a fully balanced
signal path and an extremely high-quality power supply for ultra low
distortion and noise. It provides seven audio inputs; four for sources with
unbalanced outputs, and three for balanced sources. Each source can be
individually adjusted for sensitivity, and identified on the eight-character
alphanumeric display with a name of your choice. A very high quality MC or
MM phono stage is available as an option for the dedicated LP input.
This guide is designed to enable you to obtain the best possible results
from the unit, and it includes information about customising the unit to
your own requirements.
If you have just purchased the 502 Analogue Controller you should first
turn to the chapter Setting up the analogue controller, page 23, which
explains how to unpack and install the analogue controller correctly.