Setting up the analogue controller
24
Unpacking
The 502 Analogue Controller comes in a box containing the
following components:
❍
502 Analogue Controller.
❍
1 power cord.
❍
1 500 Series communications lead.
❍
This manual.
You are advised to retain the packing in case you need to
transport the unit.
To position the analogue controller
Do not place the analogue controller:
❍
In direct sunlight.
❍
Near heat sources, eg a radiator.
❍
On top of a power amplifier, as the heat generated may
damage the analogue controller.
However, it can be stacked on a 508 20-Bit CD Player and
504 Stereo FM Tuner, if you have these Meridian components in
your system.
Radio interference
FCC Warning: This equipment generates and can radiate radio
frequency energy and if not installed and used correctly in
accordance with our instructions may cause interference to
radio communications or radio and television reception. It has
been type-tested and complies with the limits set out in Subpart
J, Part 15 of FCC rules for a Class B computing device. These
limits are intended to provide reasonable protection against
such interference in home installations.
EEC: This product has been designed to comply with the limits
set out in EN55013 and EN55020C.
