Customising the analogue controller
16
When the analogue controller is set to one of the standard
settings the twelve source selection keys on the remote select
the standard labels and inputs, as shown in the table on
page 15.
If the configuration you want is not catered for by one of the
standard settings, you can configure each source individually.
The 502 Analogue Controller provides 12 sources corresponding
to the 12 source selection keys on the remote:
CD, Radio, LP, TV, Tape1, Tape2, CDR, Cable, Text, VCR1,
VCR2, and LD.
For each source you can configure:
❍
The label used for it on the front panel display, from the
alternative labels.
❍
The audio input it selects.
❍
Its sensitivity.
❍
Whether or not it is a Tape source.
❍
The comms type and address, to identify other Meridian 500
Series equipment.
The procedure for doing this is as follows.
Configuring the sources
