Merging MERGING+NADAC Reference Manual Download | Manualshive

Page: 37 / 75

background image

nadac.merging.com

Page 36

When in Auto mode, any changes to the network configuration, such as connecting the NADAC to
another switch or computer, changing the main router DHCP settings requires that the unit be
rebooted, as well as any computer having been subjected to these changes.

Address:

To change the IP address, with the

IP Settings

options box set to Manual, use the

Rotary Control to outline the first field in the address line, then briefly press the
control. The number in this field will appear highlighted to indicate that it may now
be changed. Rotate the control clockwise to increase the number and counter
clockwise to decrease the number. When the required number has been set, briefly
press the control and the highlighting will disappear indicating that the change has
been accepted.

Repeat the process to make changes to the three other fields in the IP address line.

Netmask

: To change the Netmask, with the IP Settings options box set to Manual,

use the Rotary Control to outline the

Netmask

options box, then briefly press the

control. This will open a menu showing the Netmask options available. The asterisk
shows the currently selected Netmask.

Use the control to highlight the required Netmask setting and briefly press the
control again. The display will revert to the Network menu, Figure 31, with the new
setting shown in the Netmask option box.

If you have changed the IP address or Netmask setting you must complete the next step.

Apply:

If you have made any changes to the network settings you must save the new
settings and reboot the unit. Do this by using the Rotary Control to outline the

Apply

button, then briefly press the control. When the unit has rebooted and the

home screen is displayed, it will be ready to use with the new network settings.

The NADAC has no DHCP-server capability.

By default the NADAC IP setting is set to “Auto” configuration mode, which gives an
address in the range 169.254.xxx.xxx if no DHCP server is present on the network. Users are free to put
a DHCP server in their RAVENNA network with a customized address range and the
NADAC will get an IP address from this server. We recommend that user always restart the
NADAC if any changes have been made to the network configuration.

Merging Technologies recommend that the NADAC be configured in “Auto” mode.
Please be aware that when the NADAC is started in Maintenance mode, the IP
configuration mode defaults to Auto and cannot be changed.

«
...
35
36
37
38
39
...
»

Summary of Contents for MERGING+NADAC












































































Reviews:

No comments

Related manuals for MERGING+NADAC

Brand: Xtreamer Pages: 2

Brand: K&S BASIC Pages: 17

Brand: matson Pages: 11

Brand: NAIM Pages: 28

Brand: Aspar Pages: 14

Brand: MAGIRA Pages: 58

Brand: Trace Engineering Pages: 2

DIGITAL plus LC100

Brand: Lenz Pages: 8

Brand: OneFex Pages: 37

Brand: leadsun Pages: 8

AS-i CompactLineM12 AC2413

Brand: IFM Pages: 7

Brand: I-Tech Pages: 32

Brand: DAC Pages: 47

Brand: Seneca Pages: 8

Brand: Felicitysolar Pages: 17

Brand: Microchip Technology Pages: 22

Brand: Uhlenbrock Elektronik Pages: 4

miConverter GX/T

Brand: Omnitron Systems Technology Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands