Merging MERGING+NADAC Reference Manual Download | Manualshive

Page: 35 / 75

background image

nadac.merging.com

Page 34

Badge Dim

This allows the brightness of the power button illumination to be varied. This
option does not affect the brightness of the front panel display.

To adjust the power button illumination brightness, use the Rotary Control to
outline the

Badge Dim

options box in the System menu - Figure 25, then briefly

press the Rotary Control. The number in the box will be highlighted. Turning the
Rotary Control counter clockwise will reduce the number in the box and also reduce
the power button illumination brightness. Turning the Rotary Control clockwise will
increase the number in the box and also increase the power button illumination
brightness. When the required illumination level has been set,

briefly press the

Rotary Control to confirm the selection.

The display will revert to the System menu,

Figure 25, with the new power button illumination setting shown in the

Badge Dim

options box.

Screensaver:

If 10 minutes elapse without any changes being made to the unit’s control settings,

the front panel display will go blank. This is to preserve the life of the display. To turn the display back

on, turn or briefly press the Rotary Control, or briefly press the front panel power button.

«
...
33
34
35
36
37
...
»

Summary of Contents for MERGING+NADAC












































































Reviews:

No comments

Related manuals for MERGING+NADAC

Brand: Harman Kardon Pages: 6

Brand: Harman Kardon Pages: 16

Brand: Rane Pages: 2

Brand: B&B Electronics Pages: 2

Pocketdish AV402E

Brand: Dish Network Pages: 2

Brand: B&K Pages: 2

Brand: ICP DAS USA Pages: 8

Brand: Vanner Pages: 28

Digiwatts RN3000US

Brand: Renovo Pages: 54

Brand: Rohde & Schwarz Pages: 653

Brand: GoMax Electronics Pages: 12

Brand: Optelecom-nkf Pages: 4

Brand: Advent Pages: 110

Brand: Kohler Pages: 12

Brand: Mastervolt Pages: 22

Brand: Yangzhou Shenzhou Wind-driven Generator Pages: 35

Brand: NSK Pages: 52

Wireless Digital Media Player DMP011000-01

Brand: ActionTec Pages: 71

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands