Mercury 2006 Mountaineer Owner'S Manual Download Page 294

Page: 294 / 344

•

4.0L V6 engine

•

4.6L V8 engine

6. Wipe the indicator clean. Insert the indicator fully, then remove it
again.

•

If the oil level is

between the lower and upper holes,

the oil level

is acceptable,

DO NOT ADD OIL.

•

If the oil level is below the lower hole, add enough oil to raise the
level within the lower and upper holes.

2006 Mountaineer

(mnt)

Owners Guide (post-2002-fmt)
USA

(fus)

Maintenance and Specifications

294

Summary of Contents for 2006 Mountaineer

























































































































































































































































































































































Search results

Summary of Contents for 2006 Mountaineer

Reviews:

Related manuals for 2006 Mountaineer

Brands by name

Popular brands

Mercury 2006 Mountaineer, Owner'S Manual

Search results

Summary of Contents for 2006 Mountaineer

Reviews:

Related manuals for 2006 Mountaineer

Brands by name

Popular brands