Mercury 2006 Mountaineer Owner'S Manual Download Page 18

Page: 18 / 344

Key-in-ignition warning chime:

Sounds when the key is left in the

ignition in the OFF/LOCK or ACCESSORY position and the driver’s door
is opened.

Headlamps on warning chime:

Sounds when the headlamps or parking

lamps are on, the ignition is off (the key is not in the ignition) and the
driver’s door is opened.

Turn signal warning chime:

Sounds when the turn signal lever has

been activated to signal a turn and not turned off after the vehicle is
driven more than 2 miles (3.2 km).

Parking brake ON warning chime:

Sounds when the parking brake is

set, the engine is running and the vehicle is driven more than 3 mph (5
km).

Message center activation chime:

Sounds when the following

warnings DOOR AJAR, LOW FUEL LEVEL or LOW TIRE PRESSURE
appear in the message center display for the first time.

GAUGES

Speedometer:

Indicates the

current vehicle speed.

2006 Mountaineer

(mnt)

Owners Guide (post-2002-fmt)
USA

(fus)

Instrument Cluster

Summary of Contents for 2006 Mountaineer

























































































































































































































































































































































Search results

Summary of Contents for 2006 Mountaineer

Reviews:

Related manuals for 2006 Mountaineer

Brands by name

Popular brands

Mercury 2006 Mountaineer, Owner'S Manual

Search results

Summary of Contents for 2006 Mountaineer

Reviews:

Related manuals for 2006 Mountaineer

Brands by name

Popular brands