Mercury 2006 Mountaineer Owner'S Manual Download Page 261

Page: 261 / 344

Removing the spare tire

Do not use an impact wrench on the winch drive nut. This will
damage the spare tire winch.

1. Open the cover from the carpeting on cargo floor to expose the winch
drive nut.

2. Insert the lug wrench on the
winch drive nut.

The wrench will stop moving and
forward resistance to turning will be
felt when properly engaged.

2006 Mountaineer

(mnt)

Owners Guide (post-2002-fmt)
USA

(fus)

Roadside Emergencies

261

Summary of Contents for 2006 Mountaineer

























































































































































































































































































































































Search results

Summary of Contents for 2006 Mountaineer

Reviews:

Related manuals for 2006 Mountaineer

Brands by name

Popular brands

Mercury 2006 Mountaineer, Owner'S Manual

Search results

Summary of Contents for 2006 Mountaineer

Reviews:

Related manuals for 2006 Mountaineer

Brands by name

Popular brands