Mercury 2006 Mountaineer Owner'S Manual Download Page 223

Page: 223 / 344

Electronic Stability Control (ESC)

The Electronic Stability Control (ESC) with RSC system may enhance
your vehicle’s stability during adverse maneuvers.

The AdvanceTrac

威

with RSC system helps the driver maintain steering

control. AdvanceTrac

威

with RSC will attempt to correct the vehicle

motion by applying brake force at individual tires and, if necessary, by
reducing engine power.

During Electronic Stability Control events the “sliding car” icon in the
instrument cluster will flash momentarily.

Driving maneuvers which may activate AdvanceTrac

威

with RSC system

include:

•

Taking a turn too fast.

•

Maneuvering quickly to avoid an accident, pedestrian or obstacle.

•

Driving over a patch of ice.

•

Changing lanes on a snow-rutted road.

•

Entering a snow-free road from a snow-covered side street, or vice
versa.

•

Entering a paved road from a gravel road, or vice versa.

•

Driving on slick surfaces.

•

Cornering while towing a heavily loaded trailer (refer to

Trailer

towing

in the

Tires, Wheels and Loading

chapter.)

Roll Stability Control

娂

(RSC)

The RSC system works in conjunction with the AdvanceTrac

威

system to

help maintain roll stability of the vehicle during aggressive maneuvers by
applying brake force to one or more wheels.

During Roll Stability Control

娂

(RSC) events the “sliding car” icon in the

instrument cluster will flash momentarily.

Driving conditions that may activate AdvanceTrac

威

with RSC include:

•

Emergency lane-change

•

Taking a turn too fast

•

Quick maneuvering to avoid an accident, pedestrian or obstacle

2006 Mountaineer

(mnt)

Owners Guide (post-2002-fmt)
USA

(fus)

Driving

223

Summary of Contents for 2006 Mountaineer

























































































































































































































































































































































Search results

Summary of Contents for 2006 Mountaineer

Reviews:

Related manuals for 2006 Mountaineer

Brands by name

Popular brands

Mercury 2006 Mountaineer, Owner'S Manual

Search results

Summary of Contents for 2006 Mountaineer

Reviews:

Related manuals for 2006 Mountaineer

Brands by name

Popular brands