Mercury 2006 Milan Owner'S Manual Download Page 13

Page: 13 / 256

High beams:

Illuminates when the

high beam headlamps are turned on.

Key-in-ignition warning chime:

Sounds when the key is left in the

ignition in the OFF/LOCK or ACCESSORY position and the driver’s door
is opened.

Headlamps on warning chime:

Sounds when the headlamps or parking

lamps are on, the ignition is off (the key is not in the ignition) and the
driver’s door is opened.

Parking brake ON:

Sounds when the parking brake is left ON and

driven. If the warning stays on after the park brake is off, contact your
authorized dealer as soon as possible.

GAUGES

Speedometer:

Indicates the

current vehicle speed.

2006 Milan

(mln)

Owners Guide (post-2002-fmt)
USA

(fus)

Instrument Cluster

Summary of Contents for 2006 Milan

































































































































































































































































Search results

Summary of Contents for 2006 Milan

Reviews:

Related manuals for 2006 Milan

Brands by name

Popular brands

Mercury 2006 Milan, Owner'S Manual

Search results

Summary of Contents for 2006 Milan

Reviews:

Related manuals for 2006 Milan

Brands by name

Popular brands