•
one or more impact and safing sensors
•
a readiness light and tone
•
and the electrical wiring which connects the components
•
Side curtain airbag system. Refer to
Side curtain airbag system
later
in this chapter.
•
Front passenger sensing system. Refer to
Front passenger sensing
system.
later in this chapter.
•
“Passenger airbag off” or “pass airbag off” indicator lamp. Refer to
Front passenger sensing system.
later in this chapter.
The diagnostic module monitors its own internal circuits and the
supplemental airbag electrical system wiring (including the impact
sensors), the system wiring, the airbag system readiness light, the airbag
back up power, the airbag ignitors and safety belt pretensioners.
Front passenger sensing system
The front passenger sensing system is designed to meet the regulatory
requirements of Federal Motor Vehicle Safety Standard (FMVSS) 208
and is designed to disable (will not inflate) the front passenger’s frontal
airbag under certain conditions.
The front passenger sensing system works with sensors that are part of
the front passenger’s seat and safety belt. The sensors are designed to
detect the presence of a properly seated occupant and determine if the
front passenger’s frontal airbag should be enabled (may inflate) or
disabled (will not inflate).
The front passenger sensing system will disable (will not inflate) the
front passenger’s frontal airbag if:
•
the front passenger seat is unoccupied, or has small/medium objects in
the front seat.
•
the system determines that an infant is present in a rear-facing infant
seat that is installed according to the manufacturer’s instructions.
•
the system determines that a small child is present in a forward-facing
child restraint that is installed according to the manufacturer’s
instructions.
•
the system determines that a small child is present in a booster seat.
•
a front passenger takes his/her weight off of the seat for a period of
time.
2006 Milan
(mln)
Owners Guide (post-2002-fmt)
USA
(fus)
Seating and Safety Restraints
112
