manualshive.com logo in svg

Mercury 2006 Milan, Owner'S Manual

The Mercury 2006 Milan Quick Reference Manual is a comprehensive guide that allows users to easily navigate and understand their vehicle's features. This essential manual is available for free download at manualshive.com, providing users with convenient access to the information they need to maximize their driving experience.

Share
Download
background image

For side airbag equipped vehicles, the front passenger sensing system
will turn off the passenger seat side airbag if:

•

the seat is empty and safety belt is unbuckled.

•

a child or a small person occupies the front passenger seat and the
child or small person is unbuckled.

The front passenger sensing system
uses a

⬙

passenger airbag off

⬙

or

⬙

pass airbag off

⬙

indicator which will

illuminate and stay lit to remind you
that the front passenger frontal
airbag is disabled. The indicator
lamp is located in the center stack of the instrument panel above the
radio.

Note

: The indicator lamp will illuminate for a short period of time when

the ignition is turned to the ON position to confirm it is functional.

When the front passenger seat is not occupied (empty seat) or in the
event that the front passenger frontal airbag is enabled (may inflate), the
indicator lamp will be unlit.

The front passenger sensing system is designed to disable (will not
inflate) the front passenger’s frontal airbag when a rear facing infant
seat, a forward-facing child restraint, or a booster seat is detected.

•

When the front passenger sensing system disables (will not inflate)
the front passenger frontal airbag, the indicator lamp will illuminate
and stay lit to remind you that the front passenger frontal airbag is
disabled.

•

If the child restraint has been installed and the indicator lamp is not
lit, then turn the vehicle off, remove the child restraint from the
vehicle and reinstall the restraint following the child restraint
manufacturer’s instructions.

The front passenger sensing system is designed to enable (may inflate)
the front passenger’s frontal airbag anytime the system senses that a
person of adult size is sitting properly in the front passenger seat.

•

When the front passenger sensing system enables the front passenger
frontal airbag (may inflate), the indicator lamp will be unlit and stay
unlit.

2006 Milan

(mln)

Owners Guide (post-2002-fmt)
USA

(fus)

Seating and Safety Restraints

113

Summary of Contents for 2006 Milan

































































































































































































































































Reviews:

No comments

Related manuals for 2006 Milan

Neuspeed 25.02.22.2 Installation Instructions preview
25.02.22.2
Brand: Neuspeed Pages: 2
FORM FIT SD 13R07-5 Installation Instructions preview
SD 13R07-5
Brand: FORM FIT Pages: 2
Thule Edge Flush Rail Instructions Manual preview
Edge Flush Rail
Brand: Thule Pages: 12
Ford FIESTA ST 2019 Supplement Manual preview
FIESTA ST 2019
Brand: Ford Pages: 37
TUFLOC Dodge Charger TufBox Installation Instructions Manual preview
Dodge Charger TufBox
Brand: TUFLOC Pages: 6
Ford Focus ST 2018 Supplement Manual preview
Focus ST 2018
Brand: Ford Pages: 38
Quadratec 12226.3011 Installation Manual preview
12226.3011
Brand: Quadratec Pages: 8
Nuna Bugaboo turtle Instructions For Installation Manual preview
Bugaboo turtle
Brand: Nuna Pages: 17
Westfalia 859528 Original Instructions Manual preview
859528
Brand: Westfalia Pages: 10
Roadmaster 195125 Assembly And Operating Instructions preview
195125
Brand: Roadmaster Pages: 4
AUTOTECH 10.297.300K-303K Installation Instructions preview
10.297.300K-303K
Brand: AUTOTECH Pages: 1
MBW i Wallbox Plus Owner'S Manual preview
i Wallbox Plus
Brand: MBW Pages: 40
Yakima Safety Pole Quick Start Manual preview
Safety Pole
Brand: Yakima Pages: 4
Kia RIO 2005 General Information Manual preview
RIO 2005
Brand: Kia Pages: 25
TERAFLEX 1365000 Manual preview
1365000
Brand: TERAFLEX Pages: 18
Gold Lantern GL-VTMK20 Specifications preview
GL-VTMK20
Brand: Gold Lantern Pages: 1
Metec 806255 Mounting Instructions preview
806255
Brand: Metec Pages: 2
RADICAL R-C10-DAB Installation Manual preview
R-C10-DAB
Brand: RADICAL Pages: 4

Brands by name

Popular brands

Load more brands