Mercury 2006 Milan Owner'S Manual Download Page 68

Page: 68 / 256

CHECK BRAKE SYSTEM.

Displayed when the brake system needs

servicing. If the warning stays on or continues to come on, contact your
authorized dealer as soon as possible.

LOW BRAKE FLUID.

Indicates the brake fluid level is low and the

brake system should be inspected immediately. Refer to

Brake fluid

reservoir

in the

Maintenance and Specifications

chapter.

TRUNK AJAR.

Displayed when the trunk is not completely closed.

COMPASS ERROR (if equipped).

Displayed when the compass is not

operating properly. If the warning stays on or continues to come on,
contact your authorized dealer as soon as possible.

CHECK LEFT OR RIGHT HEADLAMPS.

Displayed when the

headlamps are activated and at least one low beam is burned out. Check
the lamps as soon as possible and have the burned out lamp replaced.
Refer to

Replacing headlamp bulbs

in the

Lights

chapter.

CHECK LF OR RF TURN LAMPS.

Displayed when the turn signals are

activated and at least one is burned out. Check the lamps as soon as
safely possible and have the burned out lamp replaced. Refer to

Replacing headlamp bulbs

in the

Lights

chapter.

CHECK LR OR RR TURN LAMPS.

Displayed when the rear turn

signals are activated and at least one is burned out. Check the lamps as
soon as safely possible and have the burned out lamp replaced. Refer to

Replacing headlamp bulbs

in the

Lights

chapter.

INTEGRATED KEY PROGRAMMING STATUS.

Displayed when an

attempt is made to program a fifth Integrated Key to the Remote Key
Entry System. For more information on Integrated Key, refer to

Locks

and Security

chapter in this manual.

INTERIOR TRUNK CONTROL

Press the remote trunk release
control on the instrument panel to
the left of the steering wheel.

2006 Milan

(mln)

Owners Guide (post-2002-fmt)
USA

(fus)

Driver Controls

Summary of Contents for 2006 Milan

































































































































































































































































Search results

Summary of Contents for 2006 Milan

Reviews:

Related manuals for 2006 Milan

Brands by name

Popular brands

Mercury 2006 Milan, Owner'S Manual

Search results

Summary of Contents for 2006 Milan

Reviews:

Related manuals for 2006 Milan

Brands by name

Popular brands