manualshive.com logo in svg

Mercury 2006 Milan, Owner'S Manual

The Mercury 2006 Milan Quick Reference Manual is a comprehensive guide that allows users to easily navigate and understand their vehicle's features. This essential manual is available for free download at manualshive.com, providing users with convenient access to the information they need to maximize their driving experience.

Share
Download
background image

The tires on your vehicle have all weather treads to provide traction in
rain and snow. However, in some climates, you may need to use snow
tires and chains.

Follow these guidelines when using snow tires and chains:

•

Use only SAE class

⬙

S

⬙

cables or equivalent on the front axle for

P205/60R16 equipped vehicles. SAE class “S” chains or other
conventional link chains may cause damage to the vehicles wheel
house and/or body.

•

Do not install tire chains, cables, or optional traction devices on the
rear tires. This could cause damage to the vehicle’s wheel house or
body.

•

Do not use tire chains, cables, or optional traction devices with
optional P225/50R17 tires.

•

Install cable chains securely, verifying that the cables do not touch any
wiring, brake lines or fuel lines.

•

Drive cautiously. If you hear the cables rub or bang against your
vehicle, stop and re-tighten the cables. If this does not work, remove
the cables to prevent damage to your vehicle.

•

If possible, avoid fully loading your vehicle.

•

Remove the tire cables when they are no longer needed. Do not use
tire cables on dry roads.

•

The suspension insulation and bumpers will help prevent vehicle
damage. Do not remove these components from your vehicle when
using snow tires and chains.

•

Do not exceed 30 mph (48 km/h) with tire cables on your vehicle.

VEHICLE LOADING

This section will guide you in the proper loading of your vehicle to keep
your loaded vehicle weight within its design rating capability. Properly
loading your vehicle will provide maximum return of vehicle design
performance. Before loading your vehicle, familiarize yourself with the
following terms for determining your vehicle’s weight ratings from the
vehicle’s Tire Label or Safety Compliance Certification Label:

Base Curb Weight

– is the weight of the vehicle including a full tank of

fuel and all standard equipment. It does not include passengers, cargo, or
optional equipment.

Vehicle Curb Weight

– is the weight of your new vehicle when you

picked it up from your authorized dealer plus any aftermarket
equipment.

2006 Milan

(mln)

Owners Guide (post-2002-fmt)
USA

(fus)

Tires, Wheels and Loading

149

Summary of Contents for 2006 Milan

































































































































































































































































Reviews:

No comments

Related manuals for 2006 Milan

Toyota 2012 Rav4 Owner'S Manual preview
2012 Rav4
Brand: Toyota Pages: 529
Porsche 911 GT3 - Brochure preview
911 GT3 -
Brand: Porsche Pages: 51
Whispbar K710W Fitting Instructions For Basic Carrier preview
K710W
Brand: Whispbar Pages: 14
Cargo Floor CF500 SL-2 Replacement Instructions Manual preview
CF500 SL-2
Brand: Cargo Floor Pages: 16
UAZ UAZ-374195 Operating Manual preview
UAZ-374195
Brand: UAZ Pages: 90
Hyundai Santa Fe 2006 Owner'S Manual preview
Santa Fe 2006
Brand: Hyundai Pages: 280
P-Invent Troller User Manual preview
Troller
Brand: P-Invent Pages: 4
Fiat Fiat Bravo LPG Owner'S Manual preview
Fiat Bravo LPG
Brand: Fiat Pages: 24
Valeo AS1A Owner'S Manual preview
AS1A
Brand: Valeo Pages: 28
ULTIMATE SPEED 91449 Operation And Safety Notes preview
91449
Brand: ULTIMATE SPEED Pages: 34
Gator GRM430EM User Manual preview
GRM430EM
Brand: Gator Pages: 6
Saab 32 025 603 Installation Instructions Manual preview
32 025 603
Brand: Saab Pages: 15
JBL smartbase Quick Start Manual preview
smartbase
Brand: JBL Pages: 12
Prorack K374 Manual preview
K374
Brand: Prorack Pages: 14
Yakima Landing Pad 11 Manual preview
Landing Pad 11
Brand: Yakima Pages: 28
Cadillac Escalade 2004 Escalade ESV Owner'S Manual preview
Escalade 2004 Escalade ESV
Brand: Cadillac Pages: 472
Whispbar K481W Fitting Instructions Manual preview
K481W
Brand: Whispbar Pages: 14
Menabo YELO 4 NS Fitting Instructions Manual preview
YELO 4 NS
Brand: Menabo Pages: 8

Brands by name

Popular brands

Load more brands