manualshive.com logo in svg

Mercury 2002 Cougar, Owner'S Manual

The Mercury 2002 Cougar Workshop Manual is a comprehensive guide that enables car owners to perform maintenance and repairs on their vehicles with ease. This reliable manual is available for download free of charge from manualshive.com, providing users with the necessary instructions and information for efficient DIY automotive care.

Share
Download
background image

Safety belt pretensioner

Your vehicle is equipped with safety belt pretensioners at the driver and
front outboard passenger seating positions.

The safety belt pretensioners are designed to activate only when the
safety belts are fastened during certain frontal or near-frontal collisions
with sufficient longitudinal deceleration. A safety belt pretensioner is a
device which tightens the webbing of the lap and shoulder belts in such
a way that they fit more snugly against the body.

The driver and front outboard passenger safety belt system (including
retractors, buckles and height adjusters) must be replaced if the vehicle
is involved in a collision that results in the activation of the safety belt
pretensioners. Refer to the

Safety belt maintenance

section in this

chapter.

In the event of a collision resulting in the deployment of the
front air bags, the front safety belts must be replaced if they

were in use. Failure to replace the safety belt assembly could result in
severe personal injuries in the event of a collision.

Safety belt usage sensors

The driver and front outboard passenger safety belt buckles are
equipped with sensors that detect if the safety belts are fastened. The
sensors provide information to the Personal Safety System which can
then adapt the air bag deployment or safety belt pretensioner activation
based upon safety belt usage.

The Personal Safety System provides the most benefit to belted
occupants. The system monitors and tailors the air bag

deployment based upon safety belt usage. Failure to properly wear
your safety belt will increase your risk of injury.

Seating and Safety Restraints

106

Summary of Contents for 2002 Cougar


















































































































































































































































Reviews:

No comments

Related manuals for 2002 Cougar

Accel 2020 Installation Instructions preview
2020
Brand: Accel Pages: 2
Kuda-Phonebase 055040 Installation Instruction preview
055040
Brand: Kuda-Phonebase Pages: 3
Dynojet 24xLC2 Linx Installation Manual preview
24xLC2 Linx
Brand: Dynojet Pages: 68
Kuda-Phonebase 283410 Installation Instruction preview
283410
Brand: Kuda-Phonebase Pages: 3
Audi Q3 2015 - 2019 Technical Service Bulletin preview
Q3 2015 - 2019
Brand: Audi Pages: 12
Inbay 241170-53-1 Installation Manual preview
241170-53-1
Brand: Inbay Pages: 20
JKS OGS125 Installation Instructions preview
OGS125
Brand: JKS Pages: 3
Parrot Parrot MKi + ParrotCK3100 range LOGAN Installation Manual preview
Parrot MKi + ParrotCK3100 range LOGAN
Brand: Parrot Pages: 10
MULTILIFT ULTIMA S Installation Instructions Manual preview
ULTIMA S
Brand: MULTILIFT Pages: 62
Improved Racing E5G-601 Instructions Manual preview
E5G-601
Brand: Improved Racing Pages: 17
Mercedes-Benz 2007 SLR Mclaren Operator'S Manual preview
2007 SLR Mclaren
Brand: Mercedes-Benz Pages: 425
Honda 2000 Accord Sedan Online Reference Owner'S Manual preview
2000 Accord Sedan
Brand: Honda Pages: 320
Buick 2006 LaCrosse Getting To Know Manual preview
2006 LaCrosse
Brand: Buick Pages: 20
NavLinkz RL1-MMI3G Manual preview
RL1-MMI3G
Brand: NavLinkz Pages: 17
CAME UNIPARK ARK1 Manual preview
UNIPARK ARK1
Brand: CAME Pages: 14
Kia D9062 ADU00 Manual preview
D9062 ADU00
Brand: Kia Pages: 17
AAMP Global ECHOMASTER PRO ParkAlert PS-TRUCK30 User Manual preview
ECHOMASTER PRO ParkAlert PS-TRUCK30
Brand: AAMP Global Pages: 12
LAS 10155 Manual preview
10155
Brand: LAS Pages: 4

Brands by name

Popular brands

Load more brands