manualshive.com logo in svg

Mercury 2002 Cougar, Owner'S Manual

The Mercury 2002 Cougar Workshop Manual is a comprehensive guide that enables car owners to perform maintenance and repairs on their vehicles with ease. This reliable manual is available for download free of charge from manualshive.com, providing users with the necessary instructions and information for efficient DIY automotive care.

Share
Download
background image

Do not put anything on or over the air bag module. Placing
objects on or over the air bag inflation area may cause those

objects to be propelled by the air bag into your face and torso causing
serious injury.

Do not attempt to service, repair, or modify the Air Bag
Supplemental Restraint System or its fuses. See your Ford or

Lincoln Mercury dealer.

The front passenger air bag is not designed to offer protection to
an occupant in the center front seating position.

Modifications to the front end of the vehicle, including frame,
bumper, front end body structure and tow hooks may affect the

performance of the air bag sensors increasing the risk of injury. Do not
modify the front end of the vehicle.

Children and air bags

For additional important safety
information, read all information on
safety restraints in this guide.

Children must always be properly
restrained. Accident statistics
suggest that children are safer when
properly restrained in the rear
seating positions than in the front
seating position. Failure to follow
these instructions may increase the
risk of injury in a collision.

Air bags can kill or injure a
child in a child seat.

NEVER

place a rear-facing child

seat in front of an active air bag. If
you must use a forward-facing
child seat in the front seat, move
the seat all the way back.

Seating and Safety Restraints

117

Summary of Contents for 2002 Cougar


















































































































































































































































Reviews:

No comments

Related manuals for 2002 Cougar

JETBAG 320 Fitting Instructions Manual preview
320
Brand: JETBAG Pages: 44
RAM 2015 1500 User Manual preview
2015 1500
Brand: RAM Pages: 292
RAM Trucks 1500 User Manual preview
Trucks 1500
Brand: RAM Pages: 116
BMW Wireless Charging Station Universal Instructions For Use Manual preview
Wireless Charging Station Universal
Brand: BMW Pages: 160
Globalsat MR-350P Installation Manual preview
MR-350P
Brand: Globalsat Pages: 2
Nav TV NAV-INREN Quick Manual preview
NAV-INREN
Brand: Nav TV Pages: 2
Calitop Calispace Ocean 80 Assembly Instructions preview
Calispace Ocean 80
Brand: Calitop Pages: 5
Vangear Woody-Pod Instruction Manual preview
Woody-Pod
Brand: Vangear Pages: 5
Safe Fleet FRC SafeTrack Hardware Installation Manual preview
FRC SafeTrack
Brand: Safe Fleet Pages: 20
Atera 080 705 User Information preview
080 705
Brand: Atera Pages: 3
Black Horse RB001BK Installation Instructions preview
RB001BK
Brand: Black Horse Pages: 5
Caraudio-Systems RL-LR12-TF Manual preview
RL-LR12-TF
Brand: Caraudio-Systems Pages: 9
newmotion Dynamic Power Management Home - Module Installation Instruction preview
Dynamic Power Management Home - Module
Brand: newmotion Pages: 20
TomTom LINK 105 Installation Manual preview
LINK 105
Brand: TomTom Pages: 22
Chevrolet Chevy II 1965 Owner'S Manual preview
Chevy II 1965
Brand: Chevrolet Pages: 46
Volvo Ski box Installation Instructions Manual preview
Ski box
Brand: Volvo Pages: 7
Westfalia 17 56 46 Instruction Manual preview
17 56 46
Brand: Westfalia Pages: 2
Brodit Heavy Duty ProClip Installation Instructions preview
Heavy Duty ProClip
Brand: Brodit Pages: 2

Brands by name

Popular brands

Load more brands