manualshive.com logo in svg

Mercury 2002 Cougar, Owner'S Manual

The Mercury 2002 Cougar Workshop Manual is a comprehensive guide that enables car owners to perform maintenance and repairs on their vehicles with ease. This reliable manual is available for download free of charge from manualshive.com, providing users with the necessary instructions and information for efficient DIY automotive care.

Share
Download
background image

The use of tire sealants is not recommended and may
compromise the integrity of your tires.

Temporary spare tire information

The temporary spare tire for your vehicle is labeled as such. It is smaller
than a regular tire and is designed for emergency use only. Replace the
temporary spare tire with a full-size tire as soon as possible.

If you use the temporary spare tire continuously or do not follow
these precautions, the tire could fail, causing you to lose control

of the vehicle, possibly injuring yourself or others.

When driving with the temporary spare tire

do not:

•

use more than one temporary spare tire at a time

•

exceed 80 km/h (50 mph)

•

load the vehicle beyond maximum vehicle load rating listed on the
Safety Compliance Label

•

tow a trailer

•

use tire chains

•

drive through an automatic car wash, because of the vehicle’s reduced
ground clearance

•

try to repair the temporary spare tire or remove it from its wheel

•

use the wheel for any other type of vehicle

Use of a temporary spare tire at any one wheel location can lead to
impairment of the following:

•

handling, stability and braking performance

•

comfort and noise

•

ground clearance and parking at curbs

•

Winter driving capability

Tire change procedure

1. Park on a level surface, activate hazard flashers and set parking brake.

When one of the front wheels is off the ground, the transaxle
alone will not prevent the vehicle from moving or slipping off the

jack, even if the vehicle is in P (Park).

Roadside Emergencies

164

Summary of Contents for 2002 Cougar


















































































































































































































































Reviews:

No comments

Related manuals for 2002 Cougar

Happy Orange USB-C Quick Start Manual preview
USB-C
Brand: Happy Orange Pages: 2
Hama Neptun Manual preview
Neptun
Brand: Hama Pages: 6
Horn Tools HISDMSPTRA01 Mounting Instructions preview
HISDMSPTRA01
Brand: Horn Tools Pages: 6
Neuspeed 25.02.22.2 Installation Instructions preview
25.02.22.2
Brand: Neuspeed Pages: 2
Car-Interface CI-RL4-ELINK Manual preview
CI-RL4-ELINK
Brand: Car-Interface Pages: 23
RuggON VD04 Quick Start Manual preview
VD04
Brand: RuggON Pages: 2
GMC ANDROID INTERFACE Instruction Manual preview
ANDROID INTERFACE
Brand: GMC Pages: 18
Prorack K496 Fitting Instructions For Basic Carrier preview
K496
Brand: Prorack Pages: 15
Lexus LX 470 Owner'S Manual preview
LX 470
Brand: Lexus Pages: 369
Mountain Top Sports Bar Installation Manual preview
Sports Bar
Brand: Mountain Top Pages: 12
Condor T-RAMP Quick Start Manual preview
T-RAMP
Brand: Condor Pages: 2
UAZ UAZ-374195 Operating Manual preview
UAZ-374195
Brand: UAZ Pages: 90
NavLinkz RL2-SC14 Manual preview
RL2-SC14
Brand: NavLinkz Pages: 21
Ranger design 1525-NS Installation Manual preview
1525-NS
Brand: Ranger design Pages: 22
National Cycle Quantum hardcoated N30216 Assembly Instructions And Owner'S Manual preview
Quantum hardcoated N30216
Brand: National Cycle Pages: 3
Toyota CAMRY HV Manual preview
CAMRY HV
Brand: Toyota Pages: 636
Ranger design 1506-PHX Cargo Plus Installation Manual preview
1506-PHX Cargo Plus
Brand: Ranger design Pages: 8
AUTOTECH 10.411.01.219K Installation Instructions preview
10.411.01.219K
Brand: AUTOTECH Pages: 1

Brands by name

Popular brands

Load more brands