manualshive.com logo in svg

Mercury 2002 Cougar, Owner'S Manual

The Mercury 2002 Cougar Workshop Manual is a comprehensive guide that enables car owners to perform maintenance and repairs on their vehicles with ease. This reliable manual is available for download free of charge from manualshive.com, providing users with the necessary instructions and information for efficient DIY automotive care.

Share
Download
background image

•

Decreased engine coolant concentrations below 40% will
decrease the corrosion protection characteristics of the engine
coolant and may cause engine damage.

•

Decreased engine coolant concentrations below 40% will
decrease the freeze protection characteristics of the engine
coolant and may cause engine damage.

•

Refer to the chart on the coolant container to ensure the
coolant concentration in your vehicle will provide adequate
protection at the temperatures in which you drive.

Vehicles driven year-round in non-extreme climates should use a 50/50
mixture of engine coolant and distilled water for optimum cooling system
and engine protection.

WHAT YOU SHOULD KNOW ABOUT AUTOMOTIVE FUELS

Important safety precautions

Do not overfill the fuel tank. The pressure in an overfilled tank
may cause leakage and lead to fuel spray and fire.

The fuel system may be under pressure. If the fuel filler cap is
venting vapor or if you hear a hissing sound, wait until it stops

before completely removing the fuel filler cap. Otherwise, fuel may
spray out and injure you or others.

If you do not use the proper fuel filler cap, excessive pressure or
vacuum in the fuel tank may damage the fuel system or cause

the fuel cap to disengage in a collision, which may result in possible
personal injury.

Automotive fuels can cause serious injury or death if misused or
mishandled.

Fuel ethanol and gasoline may contain benzene, which is a
cancer-causing agent.

Maintenance and Specifications

205

Summary of Contents for 2002 Cougar


















































































































































































































































Reviews:

No comments

Related manuals for 2002 Cougar

AA Products KX405 Instruction Manual preview
KX405
Brand: AA Products Pages: 8
Farad BARS PR25 - 2 Quick Start Manual preview
BARS PR25 - 2
Brand: Farad Pages: 8
Axxess AX-AM-AU92 Installation Instructions Manual preview
AX-AM-AU92
Brand: Axxess Pages: 8
Doug Thorley Headers THY-464-1 Instructions preview
THY-464-1
Brand: Doug Thorley Headers Pages: 5
Edelbrock 66002 Installation Instructions preview
66002
Brand: Edelbrock Pages: 2
Thule CIRCUIT 526XT Manual preview
CIRCUIT 526XT
Brand: Thule Pages: 12
Harman Kardon DP 2US Quick Start Manual preview
DP 2US
Brand: Harman Kardon Pages: 16
TATA Motors TIAGO XZ 2019 Owner'S Manual preview
TIAGO XZ 2019
Brand: TATA Motors Pages: 184
B&G electronics PW-50C Civilian Installation And Operation Manual preview
PW-50C Civilian
Brand: B&G electronics Pages: 7
Baja Designs 447575 Instructions preview
447575
Brand: Baja Designs Pages: 5
E&G Classics 1409-0102-10 Installation Instructions preview
1409-0102-10
Brand: E&G Classics Pages: 3
Reese Explore 63153 Instruction Manual preview
63153
Brand: Reese Explore Pages: 9
Bestop 614.04 Installation Manual preview
614.04
Brand: Bestop Pages: 31
Thetford SANICON TURBO 300 Operating Instructions Manual preview
SANICON TURBO 300
Brand: Thetford Pages: 25
Subaru 1994 Impreza Supplemental Service Manual preview
1994 Impreza
Brand: Subaru Pages: 540
Wagan Easy Air Auto Screen User Manual preview
Easy Air Auto Screen
Brand: Wagan Pages: 8
BMW M3 SEDAN Owner'S Manual preview
M3 SEDAN
Brand: BMW Pages: 392
Curt Manufacturing 13434 Installation Instructions preview
13434
Brand: Curt Manufacturing Pages: 4

Brands by name

Popular brands

Load more brands