Mercury 2002 Cougar Owner'S Manual Download Page 155 | Manualshive

Page: 155 / 241

background image

Trailer towing tips

•

Practice turning, stopping and backing up before starting on a trip to
get the feel of the vehicle trailer combination. When turning, make
wider turns so the trailer wheels will clear curbs and other obstacles.

•

Allow more distance for stopping with a trailer attached.

•

If you are driving down a long or steep hill, shift to a lower gear. Do
not apply the brakes continuously, as they may overheat and become
less effective.

•

The trailer tongue weight should be 10–15% of the loaded trailer
weight.

•

After you have traveled 80 km (50 miles), thoroughly check your
hitch, electrical connections and trailer wheel lug nuts.

•

To aid in engine/transmission cooling and A/C efficiency during hot
weather while stopped in traffic, place the gearshift lever in P (Park).

•

Vehicles with trailers should not be parked on a grade. If you must
park on a grade, place wheel chocks under the trailer’s wheels.

RECREATIONAL TOWING

Follow these guidelines for your specific powertrain combination to tow
your vehicle with all four wheels on the ground (such as behind a
recreational vehicle).

These guidelines are designed to ensure that your transmission is not
damaged due to insufficient lubrication.

All Front Wheel Drive (FWD) vehicles:

It is not recommended to tow front wheel drive vehicles with the front
drive wheels on the ground. It is recommended to tow your vehicle with
the drive wheels on a dolly or two wheel car hauling trailer.

In case of a roadside emergency with a disabled vehicle (without access
to wheel dollies, car hauling trailer or flatbed transport vehicle) your
vehicle can be flat towed (all wheels on the ground) under the following
conditions:

•

Place the transmission in N (Neutral).

•

Maximum speed is 56 km/h (35 mph).

•

Maximum distance is 80 km (50 miles).

Driving

154

«
...
153
154
155
156
157
...
»

Summary of Contents for 2002 Cougar


















































































































































































































































Reviews:

No comments

Related manuals for 2002 Cougar

Brand: J-Top Pages: 2

Brand: UltraGauge Pages: 55

Brand: Toyota Pages: 56

Brand: Toyota Pages: 35

AAB-P-RZR900-K2-001

Brand: SuperATV Pages: 3

Brand: Audi Pages: 9

Brand: Belkin Pages: 4

Brand: Volvo Pages: 188

Green Motion DC 66

Brand: Eaton Pages: 18

Brand: Toyota Pages: 636

Brand: Skoda Pages: 281

Brand: Cadillac Pages: 352

RearSight 250-8308

Brand: Rostra Pages: 2

Brand: Anker Technology Pages: 8

Brand: Mercedes-Benz Pages: 398

PRO-FLO XT 3527

Brand: Edelbrock Pages: 39

Brand: Toyota Pages: 26

Brand: Porsche Pages: 145

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands