manualshive.com logo in svg

Mercury 2002 Cougar, Owner'S Manual

The Mercury 2002 Cougar Workshop Manual is a comprehensive guide that enables car owners to perform maintenance and repairs on their vehicles with ease. This reliable manual is available for download free of charge from manualshive.com, providing users with the necessary instructions and information for efficient DIY automotive care.

Share
Download
background image

Adding engine oil

1. Check the engine oil. For instructions, refer to

Checking the engine

oil

in this chapter.

2. If the engine oil level is not within the normal range, add only certified
engine oil of the recommended viscosity. Remove the engine oil filler cap
and use a funnel to pour the engine oil into the opening.

3. Recheck the engine oil level. Make sure the oil level is not above the
MAX mark or the letter F in FULL on the engine oil level indicator
(dipstick).

4. Install the indicator and ensure it is fully seated.

5. Fully install the engine oil filler cap by turning the filler cap clockwise
until it stops.

To avoid possible oil loss, DO NOT operate the vehicle with the
engine oil level indicator and/or the engine oil filler cap removed.

Engine oil and filter recommendations

Look for this certification
trademark.

SAE 5W-20 engine oil is recommended.

Only use oils “Certified For Gasoline Engines” by the American
Petroleum Institute (API). Use Motorcraft or an equivalent oil meeting
Ford specification WSS-M2C153–H.

SAE 5W-20 oil provides optimum

fuel economy and durability performance meeting all
requirements for your vehicle’s engine

.

Do not use supplemental engine oil additives, oil treatments or engine
treatments. They are unnecessary and could, under certain conditions,
lead to engine damage which is not covered by your warranty.

Change your engine oil and filter according to the appropriate schedule
listed in the scheduled maintenance guide.

Ford production and aftermarket (Motorcraft) oil filters are designed for
added engine protection and long life. If a replacement oil filter is used

Maintenance and Specifications

197

Summary of Contents for 2002 Cougar


















































































































































































































































Reviews:

No comments

Related manuals for 2002 Cougar

Code 3 21 COVERT Series Installation And Operation Instructions Manual preview
21 COVERT Series
Brand: Code 3 Pages: 16
ABL Wallbox eM4 Single Installation Manual preview
Wallbox eM4 Single
Brand: ABL Pages: 68
Yuasa SmartShot Automatic 12V 1.5 Amp 5 Stage Technical Manual preview
SmartShot Automatic 12V 1.5 Amp 5 Stage
Brand: Yuasa Pages: 44
Renault Lodgy 2017 Driver'S Handbook Manual preview
Lodgy 2017
Brand: Renault Pages: 238
FALCON RIDGE BC-3400-FC05 Instructions For Installation And Care preview
BC-3400-FC05
Brand: FALCON RIDGE Pages: 7
Volvo 2004 C70 HPT User Manual preview
2004 C70 HPT
Brand: Volvo Pages: 30
Fab Fours F2950 Installation Instructions Manual preview
F2950
Brand: Fab Fours Pages: 21
Hyundai Entourage 2008 Quick Reference Manual preview
Entourage 2008
Brand: Hyundai Pages: 11
JCROffroad JEEP GL ADIATOR JT TOPPER ROOF RACK Install Instructions Manual preview
JEEP GL ADIATOR JT TOPPER ROOF RACK
Brand: JCROffroad Pages: 7
Vecow IVH-9000-2R440Q User Manual preview
IVH-9000-2R440Q
Brand: Vecow Pages: 110
Beper P205DIF100 Manual preview
P205DIF100
Brand: Beper Pages: 52
Weltmann KFZ-Teile 9B500016 Fitting Instructions Manual preview
9B500016
Brand: Weltmann KFZ-Teile Pages: 12
Kleinn RS-GM6 Installation Manual preview
RS-GM6
Brand: Kleinn Pages: 8
Honda 2010 Accord Coupe Owner'S Manual preview
2010 Accord Coupe
Brand: Honda Pages: 410
Jacob Jensen Electronic Parking Disc 3 User Manual preview
Electronic Parking Disc 3
Brand: Jacob Jensen Pages: 17
Kargo Master PRO-IV Assembly Instructions Manual preview
PRO-IV
Brand: Kargo Master Pages: 8
Honda 2012 CIVIC SEDAN HF Technology Reference Manual preview
2012 CIVIC SEDAN HF
Brand: Honda Pages: 8
AL-KO 811721-1 Manual preview
811721-1
Brand: AL-KO Pages: 40

Brands by name

Popular brands

Load more brands