Mercury 1997 Grand Marquis Owner'S Manual Download Page 232 | Manualshive

Page: 232 / 306

background image

232

*

[MC28000( ALL)01/96]

Traction A B C

*

[MC28100( ALL)05/96]

The traction grades, from highest to lowest, are
A, B, and C, and they represent the tire’s ability
to stop on wet pavement as measured under
controlled conditions on specified government
test surfaces of asphalt and concrete. A tire
marked C may have poor traction performance.

*

[MC28150( ALL)05/96]

R

WARNING

The traction grade assigned to this tire is
based on braking (straightahead) traction
tests and does not include cornering
(turning) traction.

*

[MC28200( ALL)01/96]

Temperature A B C

*

[MC28300( ALL)05/96]

The temperature grades are A (the highest), B,
and C, representing the tire’s resistance to the
generation of heat and its ability to dissipate
heat when tested under controlled conditions on
a specified indoor laboratory test wheel.
Sustained high temperature can cause the
material of the tire to degenerate and reduce tire
life, and excessive temperature can lead to
sudden tire failure. The grade C corresponds to
a level of performance which all passenger car
tires must meet under the Federal Motor Vehicle
Safety Standard No. 109. Grades B and A
represent higher levels of performance on the
laboratory test wheel than the minimum
required by law.

File:11rcmcg.ex

Update:Thu Jun 20 11:04:35 1996

«
...
230
231
232
233
234
...
»

Summary of Contents for 1997 Grand Marquis



















































































































































































































































































































Reviews:

No comments

Related manuals for 1997 Grand Marquis

Brand: JANE Pages: 21

ESCALADE FAMILY - SPECIFICATIONS 2011

Brand: Cadillac Pages: 1

Brand: Yakima Pages: 12

Brand: Kolpin Outdoors Pages: 6

Brand: Schartec Pages: 2

Brand: Nav TV Pages: 3

Brand: RAM Pages: 76

Brand: Advantech Pages: 59

Brand: Ford Pages: 368

Brand: Hyundai Pages: 11

Brand: RHOX Pages: 8

Brand: Jaeger Pages: 11

Brand: Westin Pages: 3

Brand: Lexus Pages: 609

Brand: Ford Pages: 312

Brand: Fortin Electronic Systems Pages: 5

Brand: Buzz Rack Pages: 8

Brand: Whispbar Pages: 43

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands