Mercury 1997 Grand Marquis Owner'S Manual Download Page 100

Page: 100 / 306

[CF33500( ALL)05/96]

To Set a Lower Set Speed

[CF33600( ALL)05/96]

❑

Press and hold COAST. Release the switch
when the desired vehicle speed is reached.
OR

[CF33700( ALL)05/96]

❑

Press and release COAST. Each press will
decrease the set speed by 1 mph (1.6 km/h).
OR

[CF33800( ALL)05/96]

❑

Depress the brake pedal. When the desired
vehicle speed is reached, press SET ACCEL.

[CF33900( ALL)05/96]

To Disengage Speed Control

[CF34000( BCGV)05/96]

❑

Depress the brake pedal.

[CF34100( ALL)05/96]

Disengaging the speed control will not erase the
previously programmed set speed.

[CF34200( ALL)05/96]

To Return to a Set Speed

[CF34300( ALL)04/96]

❑

Press RESUME. For RESUME to operate, the
vehicle speed must be faster than 30 mph
(48 km/h).

[CF35500( ALL)03/96]

Map and Reading Lamps

[CF35600( ALL)12/95]

Your vehicle has two map lamps for the
passenger and the driver. To turn on the map
lamps, push the switch next to each lamp.

[CF36100( GV)12/95]

one third page art:0010209-B

Front seat map and dome lamps

File:05rccfg.ex

Update:Mon Sep 23 08:32:35 1996

Summary of Contents for 1997 Grand Marquis



















































































































































































































































































































Search results

Summary of Contents for 1997 Grand Marquis

Reviews:

Related manuals for 1997 Grand Marquis

Brands by name

Popular brands

Mercury 1997 Grand Marquis, Owner'S Manual

Search results

Summary of Contents for 1997 Grand Marquis

Reviews:

Related manuals for 1997 Grand Marquis

Brands by name

Popular brands