Mercury 1997 Grand Marquis Owner'S Manual Download Page 91

Page: 91 / 306

[CF25100( ALL)03/96]

Removing the Key From the Ignition

[CF25200( BCGV)03/96]

Put the gearshift in P (Park).

[CF25400( ALL)01/96]

Set the parking brake fully.

[CF25500( BCGV)03/96]

Turn the ignition key to LOCK.

[CF25700( BCGV)03/96]

Remove the key.

[CF26300( BCGV)12/95]

NOTE: The automatic transmission gearshift

must be in P (Park) to move the key to
the lock position.

[CF26400( ALL)01/96]

If the key is stuck in the LOCK position, move
the steering wheel left or right until the key
turns freely.

[CF26500( ALL)12/95]

If the driver’s door is open while the key is still
in the ignition, a warning chime sounds.

[CF26700( BCGV)05/96]

WARNING

Always set the parking brake fully and
make sure the gearshift is latched in P
(Park). Turn off the ignition whenever you
leave your vehicle.

[CF26800( ALL)03/96]

WARNING

Do not leave children, unreliable adults,
or pets unattended in your vehicle.

[CF26900( ALL)02/96]

The Turn Signal Lever

[CF27000( ALL)02/96]

You can use the turn signal lever on the left side
of the steering column to:

[CF27100( ALL)04/96]

❑

operate the turn signals

[CF27200( ALL)03/96]

❑

turn the high beams on/off

[CF27300( ALL)03/96]

❑

flash the lamps

[CF27400( ALL)03/96]

❑

turn the windshield wipers and washer
on/off

[CF27500( GV)12/95]

❑

turn the cornering lamps on

File:05rccfg.ex

Update:Mon Sep 23 08:32:35 1996

Summary of Contents for 1997 Grand Marquis



















































































































































































































































































































Search results

Summary of Contents for 1997 Grand Marquis

Reviews:

Related manuals for 1997 Grand Marquis

Brands by name

Popular brands

Mercury 1997 Grand Marquis, Owner'S Manual

Search results

Summary of Contents for 1997 Grand Marquis

Reviews:

Related manuals for 1997 Grand Marquis

Brands by name

Popular brands