Mercury 1997 Grand Marquis Owner'S Manual Download Page 200 | Manualshive

Page: 200 / 306

background image

200

*

[ER21200( ALL)02/96]

5.

Turn on the heater fan in both vehicles.
Turning on the fan helps protect the
electrical system from voltage surges. Turn
off all other switches and lights in both
vehicles to prevent possible damage to either
vehicle’s electrical systems.

%

*

[ER21300( ALL)02/96]

Connecting the jumper cables

*

[ER21400( ALL)02/96]

1.

Connect one end of the first jumper cable to
the positive (+) terminal of the discharged
battery. (You can connect either jumper cable
to the positive (+) terminal, as long as you
use the same cable for both positive
terminals.) Most jumper cables have a red
cable and a black cable. The red cable is
generally used for the positive terminals and
the black for the negative ones.

*

[ER21500( ALL)02/96]

2.

Connect the other end of the first cable to
the positive (+) terminal of the booster
battery.

*

[ER21600( ALL)02/96]

3.

Connect one end of the second cable to the
negative (

S

) terminal of the booster battery

— NOT to the discharged battery.

[ER21700( ALL)02/96]

4.

Connect the other end of that cable to a
good metallic surface on the engine or frame
of the disabled vehicle making sure it is
clear of any rotating engine components. The
following illustrations show where you can
find a metallic surface.

*

[ER21800( ALL)02/96]

R

WARNING

Do not connect the end of the second
cable to the negative (

S

) terminal of the

battery to be jumped. A spark may cause
an explosion of the gases that surround
the battery.

File:10rcerg.ex

Update:Wed Jun 19 09:54:58 1996

«
...
198
199
200
201
202
...
»

Summary of Contents for 1997 Grand Marquis



















































































































































































































































































































Reviews:

No comments

Related manuals for 1997 Grand Marquis

Brand: ZAPTEC Pages: 240

Brand: Qube Pages: 19

Brand: Cadillac Pages: 32

Brand: A-Tach Mounts Pages: 2

Brand: A-Tach Mounts Pages: 2

Brand: A-Tach Mounts Pages: 2

ESCALADE - BROCHURE 2009

Brand: Cadillac Pages: 24

Brand: Cadillac Pages: 20

Brand: Cadillac Pages: 20

Brand: IAME Pages: 17

Brand: Parrot Pages: 19

Brand: Parrot Pages: 88

Brand: Parrot Pages: 2

Brand: Parrot Pages: 2

CK 3000 Evolution

Brand: Parrot Pages: 8

CK 3000 Evolution

Brand: Parrot Pages: 106

2012 Escalade Hybrid

Brand: Cadillac Pages: 90

Brand: FORM FIT Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands