Mercury 1997 Grand Marquis Owner'S Manual Download Page 156 | Manualshive

Page: 156 / 306

background image

155

*

[TO04300( ALL)01/96]

To turn the heater on, simply plug it into a
grounded 110-volt outlet. Ford recommends that
you use a 110-volt circuit that is protected by a
ground fault circuit interrupter.

*

[TO04400( ALL)01/96]

R

WARNING

To prevent electrical shock, do not use
your heater with ungrounded electrical
systems or two-pronged (cheater) adapters.

*

[TO04500( ALL)01/96]

For best results, plug the heater in at least three
hours before you start your vehicle. Using the
heater for longer than three hours will not
damage the engine, so you can plug it in at
night to start your vehicle the following
morning.

*

[TO04600( ALL)01/96]

NOTE: Be sure to disconnect the engine block

heater before driving your vehicle.

*

[TO04700( ALL)12/95]

Guarding Against Exhaust Fumes

*

[TO04800( ALL)01/96]

Carbon monoxide, although colorless and
odorless, is present in exhaust fumes. Take
precautions to avoid its dangerous effects.

*

[TO04900( ALL)02/96]

R

WARNING

Do not start your vehicle in a closed
garage or in other enclosed areas. Exhaust
fumes can be toxic. Always open the
garage door before you start the engine.

*

[TO05000( ALL)01/96]

R

WARNING

If you smell exhaust fumes inside your
vehicle, have your dealer inspect your
vehicle immediately. Do not drive if you
smell exhaust fumes.

File:08rctog.ex

Update:Tue Jun 11 13:57:50 1996

«
...
154
155
156
157
158
...
»

Summary of Contents for 1997 Grand Marquis



















































































































































































































































































































Reviews:

No comments

Related manuals for 1997 Grand Marquis

Brand: Kargo Master Pages: 5

Brand: GMC Pages: 140

Brand: N-Com Pages: 28

Brand: Triumph Pages: 86

Brand: FORM FIT Pages: 2

5TH GEN 4RUNNER

Brand: Victory 4x4 Pages: 5

Brand: Keith Pages: 2

Brand: Camcar Pages: 6

Brand: ABL Pages: 4

Brand: Edelbrock Pages: 1

Brand: FORM FIT Pages: 2

Brand: Kargo Master Pages: 6

Brand: Mercedes-Benz Pages: 54

Brand: BURY Pages: 2

2011 SRX CROSSOVER

Brand: Cadillac Pages: 416

Brand: TIE DOWN Pages: 2

Brand: Reliant Pages: 116

Brand: MMD Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands