Mercury 1997 Grand Marquis Owner'S Manual Download Page 14 | Manualshive

Page: 14 / 306

background image

10

%

*

[IS01700( BCGV)01/96]

The Mechanical Cluster

*

[IS02000( BCGV)01/96]

The following warning lights and gauges are on
the mechanical cluster. All of the warning lights
and gauges alert you to possible problems with
your vehicle. Some of the lights listed are
optional. The following sections detail what each
of these indicators means.

%

*

[IS02600( ALL)01/96]

Brake System Warning Light

*

[IS02700( ALL)03/96]

The warning light for the brakes can show two
things — that the parking brake is not fully
released, or that the brake fluid level is low in
the master cylinder reservoir. If the fluid level is
low, the brake system should be checked by a
qualified service technician.

[IS03050( GV)05/96]

one inch art:0010681-C

The brake system warning light

[IS03100( ALL)05/96]

This light comes on when the parking brake is
set, or if it is not set, it comes on briefly when
you turn the ignition key to START. It normally
goes off shortly after the engine starts and you
release the parking brake. If the light stays on
after you have fully released the parking brake,
have the hydraulic brake system serviced.

*

[IS03200( ALL)03/96]

R

WARNING

The BRAKE light indicates that the brakes
may not be working properly. Have the
brakes checked immediately.

File:03rcisg.ex

Update:Tue Jun 11 13:54:07 1996

«
...
12
13
14
15
16
...
»

Summary of Contents for 1997 Grand Marquis



















































































































































































































































































































Reviews:

No comments

Related manuals for 1997 Grand Marquis

Brand: ZAPTEC Pages: 240

Brand: Valeo Pages: 17

Brand: Safe Fleet Pages: 38

Brand: WABCO Pages: 48

Brand: Mazda Pages: 122

Brand: Metra Electronics Pages: 5

Brand: Renkforce Pages: 4

Brand: Toyota Pages: 600

Brand: rockymounts Pages: 6

Brand: ULTIMATE SPEED Pages: 10

Brand: Cadillac Pages: 529

Brand: Toro Pages: 16

Brand: Edelbrock Pages: 4

Brand: Blue Ox Pages: 5

Brand: Federal Signal Corporation Pages: 20

Sebring Convertible

Brand: Chrysler Pages: 454

Brand: Haltech Pages: 12

Brand: Erich Jaeger Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands