MAINTENANCE
72
1. Painting Boat Hull or Boat Transom
a. If anti‑fouling protection is required for boat hull or boat transom,
copper or tin base paints can be used unless otherwise prohibited
by law.
b. If using copper or tin based anti‑fouling paints, avoid any electrical
interconnection between the Mercury Marine Product, anodic
blocks, and the paint by allowing a minimum of 40 mm (1.5 in.)
unpainted area on the transom of the boat around these items.
a
b
6118
a -
Anti‑fouling paint
b -
Unpainted area
IMPORTANT: Corrosion damage that results from the improper
application of anti‑fouling paint will not be covered by the limited warranty.
NOTE: Do not paint anodes or the MerCathode System reference
electrode and anode, as this will render them ineffective as galvanic
corrosion inhibitors.
Summary of Contents for HP1075 SCi
Page 4: ...iv...
Page 8: ...viii...
